1) Excellent beam quality: smaller focusing spot, finer cutting lines, higher working efficiency and better processing quality;2) Extremely high cutting speed: twice that of CO2 laser cutting machine with the same power;3) Extremely high stability: the world-class imported fiber laser is adopted, which has stable performance and the service life of key components can reach 100,000 hours;4) Extremely high photoelectric conversion efficiency: the photoelectric conversion efficiency of fiber laser cutting machine is about 30%, which is three times higher than that of CO2 laser cutting machine, wh

The Co2 machine ordered by the customer has been debugged by our technical workers and all parameters are intact. The factory-new machines will be packed soon.

The stable operation of the machine is inseparable from the proper operation and daily maintenance. The following is a brief introduction to the daily maintenance of the laser cutting machine:1. Water replacement and cleaning of the water chiller (It is recommended to clean the water chiller once a week and replace the circulating water once)Note: The laser tube must be filled with circulating water before working.The water quality and water temperature of the circulating water directly affect the service life of the laser tube.

1) Cutting speed: the speed of fiber laser cutting machine is 4-5 times that of YAG, which is suitable for mass processing and production.2) Usage cost: The usage cost of fiber laser cutting machine is less than that of YAG solid laser cutting machine.3) photoelectric conversion efficiency: the photoelectric conversion efficiency of fiber laser cutting machine is about 10 times that of YAG.The corresponding fiber laser is expensive, so the price of fiber laser cutting machine is much higher than YAG laser cutting machine, but much lower than CO2 laser cutting machine.

What is a laser engraving machine?Laser engraving machine is a set of professional laser equipment integrating optics, mechanics and electricity. Our company's independent research and production has the characteristics of novel appearance, unique structure, convenient operation, high speed, high precision and stable use. Laser engraving machine has a wide range of applications, including:1. Printing and packaging industry: laser engraving rubber plates, laser cutting of paper products, etc.2.

Laser cutting is simply the use of high power and high density laser beam after focusing the workpiece, so that the irradiated material melting, gasification, or to reach the point of ignition, and the beam coaxial air flow blown off the molten material, to achieve a processing method of cutting parts.They fall into the following categories：(a) laser melting cuttingIn laser melting cutting, the workpiece is partially melted and the molten material is ejected by means of an air stream.

Introduction: Quasi-continuous (QCW) fiber lasers can operate in both pulsed and continuous (CW) modes, so a single laser can handle a variety of processing tasks that previously required two different lasers.There are many reasons for businesses to use quasi-continuous (QCW) fiber lasers, such as fiber lasers combining the drilling and welding advantages of a pulsed Nd:YAG laser with the cutting capabilities of a CO2 laser.

(1) High precision, fast speed, narrow cutting seam, minimum heat affected zone, smooth cutting surface without burrs.(2) The laser cutting head will not contact the material surface and will not scratch the workpiece.(3) The slit is the narrowest, the heat affected zone is the smallest, the local deformation of the workpiece is minimal, and there is no mechanical deformation.(4) Processing flexibility is good, can process arbitrary graphics, can also cut pipes and other profiles.(5) It can be used for deformation free cutting of steel plate, stainless steel, aluminum alloy plate, hard alloy a

1、 Principle of laser marking machineLaser marking machine makes use of laser beam to make permanent marks on diverse material surfaces.

The 2000wRaycus fiber laser cutting machine customized by the Hungarian customer has been debugged by the technical teacher and is being packaged. It will be delivered to the logistics and freight forwarding company for shipment soon.